Product Name: JHD 1052518
Description:
JHD 1052518 is an HDPE copolymer designed for injection molding applications requiring a balance between ease of processability, flowability, and mechanical properties.
Main Applications:
- Housewares
- High fluidity applications
- Injection molding grade
Additives:
- Thermal Antioxidant (Process Stabilizer)
- Catalyst Neutralizer (acid scavenger, lubricant)
Material Properties
Resin Properties
| Property | Unit | Typical Value | Test Method |
|---|---|---|---|
| Melt Index (190°C/2.16Kg) | g/10 min | 18 | D1238 |
| Density | g/ml | 0.952 | D1505 |
Thermal Properties
| Property | Unit | Typical Value | Test Method |
|---|---|---|---|
| Vicat Softening Point | °C | 121 | D1525 |
Moulded Properties
| Property | Unit | Typical Value | Test Method |
|---|---|---|---|
| Flexural Modulus | MPa | 1200 | D790 |
| Notched Izod Impact @ 23°C | J/m | 19 | D256/A |
Additional Notes
- This data includes typical values and should not be used as product specifications.
- Tested on compression molded specimens according to ASTM D1928°C.
Be the first to review “JHD 1052518”
Related products
HDPE
"A107260" is a high-density polyethylene with Propylene as comonomer. It is very easy flowing, high density, hardness and stiffness, largely warpage-free, for mass product articles in rapid shot frequency. Stabilization: Ca-Stearate, MgO, Irganox1010, UM V13.
HDPE
T-HD 103840 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer. It is suitable for use in rotational molding applications. T-HD 103840 UA has the following characteristics:
HDPE
T-HD 104005 EA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer. It is suitable for use as pipe coating applications. T-HD 104005 EA has the following characteristics:
HDPE
T-HD 104440 EA is a high-density polyethylene copolymer suitable as a base resin for crosslinked polyethylene pipes.
HDPE
"A107746" is a high-density polyethylene with Butene-1 as comonomer. It has a high molar mass, very good impact strength, and optimum stress cracking resistance (ESCR). Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"A104750" is a high-density polyethylene with Butene-1 as comonomer. It has high impact strength and slightly lower stiffness than BL3, with high stress cracking resistance (ESCR) even in contact with surfactants. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"A107250" is a high-density polyethylene with Propylene as comonomer. It is easy flowing, low warpage, less hard and stiff than I1. Stabilization: Ca-Stearate, Irganox1010.
HDPE
T-HD 105218 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer.
Reviews
There are no reviews yet.