“A107745” is a high-density polyethylene with Butene-1 as comonomer. It is a special grade. Stabilization: Ca-Stearate, Irganox1010, Irgafos168, Tinevin326, Tinevin622.
Applications:
- For heating oil storage tanks.
- Large containers for various chemicals.
Properties Table:
| No. | Property | Units | Test Method | Value |
|---|---|---|---|---|
| 1 | MFI (190°C/5Kg) | g/10min | ISO 1133 | 0.31 ± 0.04 |
| 2 | MFI (190°C/21.6Kg) | g/10min | ISO 1133 | 7.5 ± 1.5 |
| 3 | FRR21.6/5 | —– | —– | 24 |
| 4 | Density | g/cm³ | ISO 1183 | 0.944 ± 0.002 |
| 5 | Notched Impact Strength | mJ/mm² | ISO 179/1eA | 19 |
| 6 | Swell Ratio | % | Internal Method | 135 ± 20 |
Be the first to review “A107745”
Related products
HDPE
"A 107750" is a high-density polyethylene with propylene as comonomer. It is a medium molar mass with a narrow molar mass distribution. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"A109450F" is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown film with, in comparison to EX4, lower stiffness and increased tenacity. The product has good toughness, low gel level, and good tear strength. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168.
HDPE
"A107260" is a high-density polyethylene with Propylene as comonomer. It is very easy flowing, high density, hardness and stiffness, largely warpage-free, for mass product articles in rapid shot frequency. Stabilization: Ca-Stearate, MgO, Irganox1010, UM V13.
HDPE
HDPE1080 is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion. This grade, which is produced by 1-hexene co-monomer, is classified as HDPE1080 and provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength and good processability.
HDPE
T-HD 105218 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer.
HDPE
T-HD 103840 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer. It is suitable for use in rotational molding applications. T-HD 103840 UA has the following characteristics:
HDPE
T-HD 105030 SA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer with a medium content of slip agent additive.
HDPE
"A107746" is a high-density polyethylene with Butene-1 as comonomer. It has a high molar mass, very good impact strength, and optimum stress cracking resistance (ESCR). Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
Reviews
There are no reviews yet.