T-HD 103840 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer. It is suitable for use in rotational molding applications. T-HD 103840 UA has the following characteristics:
- Good impact strength
- Easy to demould
- UV stabilised
- Good whiteness
- Excellent surface finish
Applications
- General purpose rotomolded items
- Septic tanks
- Recycling banks
Physical and Mechanical Properties
| Property | Unit | Test Method | Typical Value |
|---|---|---|---|
| Melt Flow Index (2.16 KG) | g/10min | ASTM D-1238 | 4 |
| Density | gr/cm³ | ASTM D-1505 | 0.938 |
| Yellowness Index | – | ASTM E-313 | -1 |
| Whiteness Index | – | ASTM E-313 | 60 |
| Contamination | No. | BP137 | 5 |
| Vicat Softening Point | °C | ASTM D-1525 | 115 |
| Tensile Stress at Yield | MPa | ASTM D-638 | 15 |
| Elongation at Break | % | ASTM D-638 | 900 |
| ESCR (IGEPAL 10% F50, 230°C) | hr | ASTM D-1693 | 350 |
| Charpy Impact | kJ/m² | ASTM D-6110 | 18 |
Be the first to review “T-HD 103840 UA”
Related products
HDPE
"A107740F2" is a high-density polyethylene with Butene-1 as comonomer. It is a medium molecular mass with a narrow molar mass distribution. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"AGC107260" is a high-density polyethylene with Propylene as comonomer. The product has good impact strength, good stress cracking resistance (ESCR), low warping, and good flow ability, as well as high density, hardness, and stiffness. Stabilization: Ca-Stearate, Irganox1010.
HDPE
T-HD 105030 SA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer with a medium content of slip agent additive.
HDPE
"A104760" is a high-density polyethylene with Butene-1 as comonomer. The product has high density and high stiffness, good flow ability and impact strength, and good stress cracking resistance (ESCR). Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
HDPE S5020 is a high-density polyethylene with a broad molecular weight distribution, specially developed for small blow-molded bottles. Produced with 1-hexene as a co-monomer, it offers high stiffness, easy flow, very good ESCR, chemical resistance, and sufficient impact strength. HDPE S5020 is recommended for multipurpose blow molding processes and has been manufactured under Basell license.
HDPE
HDPE1080 is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion. This grade, which is produced by 1-hexene co-monomer, is classified as HDPE1080 and provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength and good processability.
HDPE
"A106255" is a high-density polyethylene with Butene-1 as comonomer. It is a special grade for particularly high requirements like low temperature impact strength and stacking, good stress cracking resistance (ESCR). Stabilization: Ca-Stearate, Irganox1010, Irgafos168, HOE Wax PED191.
HDPE
T-HD 106040 UA is a high-density polyethylene copolymer containing butene-1 (C4) as comonomer with medium content of light stabilizer additive.
Reviews
There are no reviews yet.