Product Name: T-SV 0157
Description:
T-SV 0157 is a styrenic terpolymer (ABS) grade with enhanced toughness compared to HIPS grades. It shows low shrinkage, good dimensional stability, and high melt strength, making it ideal for extruded sheet production and applications requiring considerable size and thickness.
Applications:
- Panels for large appliances
- Thermoformed items such as hot tubs
- Recreational vehicle parts
- Refrigerator liners
Drying Recommendations:
- Prior to processing, drying is advised in a desiccant dehumidifying hopper dryer.
- Inlet air dew point of -20°F (-29°C) or below is recommended to achieve a moisture content of 0.1%.
- Typical drying conditions:
- 2 hours at 180° – 190°F (82° – 88°C).
- 4 hours at 160° – 170°F (71° – 77°C) if lower temperature is preferred.
Physical and Mechanical Properties
| Property | Unit | Test Method | Typical Value |
|---|---|---|---|
| Melt Flow Index (200°C/5KG) | GR/10MIN | ASTM D-1238 | 0.5 |
| Izod Impact Strength | KGF.CM/CM | ASTM D-256 | 31 |
| Vicat Softening Point (5KGF LOAD) | °C | ASTM D-1525 | 101 |
| Tensile Strength at Yield | KGF/CM2 | ASTM D-638 | 430 |
| Flexural Strength at Yield | KGF/CM2 | ASTM D-790 | 620 |
| Flexural Modulus | KGF/CM2 | ASTM D-790 | 21000 |
| Rockwell Hardness (at 23°C) | R.SCALE | ASTM D-785 | 104 |
Note:
All above mentioned data are typical values and not to be construed as real specifications. Users should confirm results by their own tests. For more information about guaranteed items, please refer to S.S.S. (Standard Sales Specifications).
Be the first to review “T-SV 0157”
Related products
ABS
T-HR 2320 is a styrenic terpolymer (ABS) grade with improved toughness versus HIPS grades. It exhibits low shrinkage and good dimensional stability. T-HR 2320 is used in general injection molding applications, particularly for furniture, automotive parts, general injection molding, appliance casings, and home appliances with heat resistance characteristics.
ABS
T-SD 0150 is one of the styrenic terpolymer (ABS) grades with improved toughness compared to HIPS grades. It exhibits low shrinkage and good dimensional stability, making it ideal for general injection molding applications.
ABS
T-HR 2340 is a styrenic terpolymer (ABS) grade with enhanced toughness compared to HIPS grades. It shows low shrinkage, good dimensional stability, and is widely used in general injection molding applications. T-HR 2340 is recommended for various applications requiring high resistance to heat.
Reviews
There are no reviews yet.