Product: T-SD 0150
Description: T-SD 0150 is one of the styrenic terpolymer (ABS) grades with improved toughness compared to HIPS grades. It exhibits low shrinkage and good dimensional stability, making it ideal for general injection molding applications. This data serves as a guide for selecting the appropriate resin for various applications.
Applications:
- Furniture
- Automotive Parts
- General Injection Molding
- Appliances Casing
- Office Supplies
Drying Recommendations:
- Pre-processing drying in a desiccant dehumidifying hopper dryer is recommended.
- Inlet air dew point should be -20°F (-29°C) or below to achieve a moisture content of 0.1%.
- Typical drying conditions are:
- 2 hours at 180° – 190°F (82° – 88°C)
- Alternatively, drying for 4 hours at 160°-170°F (71°-77°C) is adequate.
Physical and Mechanical Properties:
| Property | Unit | Test Method | Typical Value |
|---|---|---|---|
| Melt Flow Index (200°C/5KG) | GR/10MIN | ASTM D-1238 | 1.8 |
| Izod Impact Strength | KGF.CM/CM | ASTM D-256 | 22 |
| Vicat Softening Point (5KGF Load) | °C | ASTM D-1525 | 98 |
| Tensile Strength at Yield | KGF/CM2 | ASTM D-638 (5mm/min) | 450 |
| Flexural Strength at Yield | KGF/CM2 | ASTM D-790 | 600 |
| Flexural Modulus | KGF/CM2 | ASTM D-790 | 22000 |
| Rockwell Hardness (at 23°C) | R.SCALE | ASTM D-785 | 105 |
Additional Information: *All above-mentioned data are typical values and not to be construed as real specifications. Users should confirm results through their tests. For guaranteed items, refer to S.S.S. (Standard Sales Specifications).
Be the first to review “T-SD 0150”
Related products
ABS
T-SV 0157 is a styrenic terpolymer (ABS) grade with enhanced toughness compared to HIPS grades. It shows low shrinkage, good dimensional stability, and high melt strength, making it ideal for extruded sheet production and applications requiring considerable size and thickness.
ABS
T-HR 2320 is a styrenic terpolymer (ABS) grade with improved toughness versus HIPS grades. It exhibits low shrinkage and good dimensional stability. T-HR 2320 is used in general injection molding applications, particularly for furniture, automotive parts, general injection molding, appliance casings, and home appliances with heat resistance characteristics.
ABS
T-HR 2340 is a styrenic terpolymer (ABS) grade with enhanced toughness compared to HIPS grades. It shows low shrinkage, good dimensional stability, and is widely used in general injection molding applications. T-HR 2340 is recommended for various applications requiring high resistance to heat.
Reviews
There are no reviews yet.