J-109450F (EX5)
Product data sheet for HDPE made via Hostalen Process.
Characteristic Properties:
- Grade: J-109450F (EX5)
- Density: 0.947 – 0.951 g/cm³
- Melt Flow Rate (MFR): 0.23 – 0.33 g/10 min (190°C/5 kg)
Main Applications:
- Blown films with pepper-like quality
- Suitable for counter bags, carrier bags, and wrapping films
- Excellent processing quality
Additives:
- Antioxidant / Process stabilizer
- Lubricant (processing aid) / Acid scavenger
Material Properties
| Test/Composition | Typical Value | Unit | Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ISO1183 |
| Fish Eye Note | ≤3 | note | Internal |
| FRR 21.6/5 | 29 | – | – |
| MFR 190°/21.6 | 8.0 | g/10min | ISO1133 |
| MFR190°/5 | 0.28 | g/10min | ISO1133 |
Additional Notes:
- Material Properties: These data are typical values and should not be construed as actual product specifications. Users should conduct their own tests to confirm these properties.
- Applications: This grade is designed for high molar mass film applications where good stiffness and tenacity are required.
- Testing Conditions:
- Test specimens are taken from compression molded sheets at 23°C.
- FRR values are statistical and calculated by dividing MFR values.
- Notch Impact Test specimen from compressed molded sheet at 23°C; the data quoted are average values.
Be the first to review “J-109450F (EX5)”
Related products
HDPE
"A GD107255" is a high-density polyethylene with Propylene as comonomer. It has high impact strength and low warping tendency. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
T-HD 103840 UA is a high-density polyethylene copolymer containing butene-1 (C4) as a comonomer. It is suitable for use in rotational molding applications. T-HD 103840 UA has the following characteristics:
HDPE
"A108255" is a high-density polyethylene with Butene-1 as comonomer. It has a high molar mass, is easily processable, has high stiffness, and provides good stress cracking resistance (ESCR) with an excellent molding surface finish. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
HDPE1080 is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion. This grade, which is produced by 1-hexene co-monomer, is classified as HDPE1080 and provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength and good processability.
HDPE
"AGC107260" is a high-density polyethylene with Propylene as comonomer. The product has good impact strength, good stress cracking resistance (ESCR), low warping, and good flow ability, as well as high density, hardness, and stiffness. Stabilization: Ca-Stearate, Irganox1010.
HDPE
HDPE S104261A is a high molecular weight, high-density polyethylene with broad molecular weight distribution, specially developed for producing automotive fuel tanks. This grade, produced with a 1-hexene co-monomer, offers excellent creep strength, processability, environmental stress cracking resistance (ESCR), and stiffness.
HDPE
"A109455F" is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown film with very high stiffness and good tenacity. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168.
HDPE
HDPE S5110 is a high molecular weight, high-density polyethylene with broad molecular weight distribution and 1-hexene as a co-monomer, specially developed for producing thin films with excellent strength and rigidity. This product is suitable for manufacturing high-strength grocery sacks, shopping bags, and high-quality thin films for uni/multi-wall packaging. Films produced with this grade can be readily treated and printed for high-quality graphics.
Reviews
There are no reviews yet.