A109450F
“A109450F” is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown film with, in comparison to EX4, lower stiffness and increased tenacity. The product has good toughness, low gel level, and good tear strength. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168.
“A109450F” is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown film with, in comparison to EX4, lower stiffness and increased tenacity. The product has good toughness, low gel level, and good tear strength. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168.
Applications:
- Food Grade
- Blown films with paper-like quality
- Suitable for counter bags
- Carrier bags
- Wrapping films and sheets
- Blending partner
Properties Table:
| No. | Property | Units | Test Method | Value |
|---|---|---|---|---|
| 1 | MFR (190°C/5Kg) | g/10min | ISO 1133 | 0.28 ± 0.07 |
| 2 | MFR (190°C/21.6Kg) | g/10min | ISO 1133 | 8.0 ± 2.0 |
| 3 | FRR21.6/5 | —– | —– | 30 ± 4 |
| 4 | Density | g/cm³ | ISO 1183 | 0.949 ± 0.002 |
Be the first to review “A109450F”
Related products
HDPE
HDPE SPE80+ is a high molecular weight, high-density polyethylene (HDPE) with high melt viscosity for extrusion. This grade, produced with a 1-hexene co-monomer, is classified as PE 80+ and provides excellent stress crack resistance (ESCR) along with very good long-term hydrostatic strength and good processability.
HDPE
"A107740F2" is a high-density polyethylene with Butene-1 as comonomer. It is a medium molecular mass with a narrow molar mass distribution. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"A109455F" is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown film with very high stiffness and good tenacity. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168.
HDPE
"AGC107260" is a high-density polyethylene with Propylene as comonomer. The product has good impact strength, good stress cracking resistance (ESCR), low warping, and good flow ability, as well as high density, hardness, and stiffness. Stabilization: Ca-Stearate, Irganox1010.
HDPE
HDPE S5020 is a high-density polyethylene with a broad molecular weight distribution, specially developed for small blow-molded bottles. Produced with 1-hexene as a co-monomer, it offers high stiffness, easy flow, very good ESCR, chemical resistance, and sufficient impact strength. HDPE S5020 is recommended for multipurpose blow molding processes and has been manufactured under Basell license.
HDPE
"A107745" is a high-density polyethylene with Butene-1 as comonomer. It is a special grade. Stabilization: Ca-Stearate, Irganox1010, Irgafos168, Tinevin326, Tinevin622.
HDPE
"A GD107255" is a high-density polyethylene with Propylene as comonomer. It has high impact strength and low warping tendency. Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
HDPE
"A104760" is a high-density polyethylene with Butene-1 as comonomer. The product has high density and high stiffness, good flow ability and impact strength, and good stress cracking resistance (ESCR). Stabilization: Ca-Stearate, Irganox1010, Irgafos168.
Reviews
There are no reviews yet.